Wt% | Log P (dynes/cm2) |
2.5 | 6.53 |
5.0 | 6.55 |
7.5 | 6.67 |
10.0 | 6.73 |
12.5 | 6.79 |
15.0 | 6.85 |
17.5 | 6.92 |
20.0 | 6.97 |
22.5 | 7.02 |
25.0 | 7.09 |
27.5 | 7.13 |
30.0 | 7.22 |
The equation that fits the data is the following:
log P = 0.025 (wt%) + 6.468
Note: This equation should only be applied over the range of pressures measured.
PVP Osmotic pressure data, (dynes/cm2) for POLYVINYLALCHOL (PVA) polymer solution (MW 10000).
Wt% | Log P (dynes/cm2) |
2.0 | 6.39 |
4.0 | 6.42 |
6.0 | 6.45 |
8.0 | 6.47 |
10.0 | 6.49 |
12.0 | 6.51 |
The equation that fits the data is the following:
log P = -0.001 (wt%)2 + 0.025 (wt%) + 6.327
Note: This equation should be applied only over the range of pressures measured.